![PrimeLine Emergency Ex ATEX luminaire for zone 1 [internal battery 1,5h or 3h]](https://hardo.tech/wp-content/uploads/2025/04/PrimeLine-typy-kloszy-wymiary-akumulator-EN-1.jpg)
PrimeLine – first choice for Zone 1
3 variants: general lighting, emergency lighting with battery and for central battery
Electrical stability and high Power Factor of Ex ATEX luminaires
Compatible with a wide range of voltages
Efficient LED power supplies
Disconnection of the power supply when the diffuser is opened
Zone 1 luminaire operation in sub-zero temperatures
Durability, robustness and ease of installation
More than 100 possible configurations
Downloads
Technical data:
Photometric data: see details below
Certifications: ATEX, IECEx, CNBOP
ATEX marking:
Ex II 2G Ex eb mb IIC T4 Gb
Ex II 2G Ex db eb mb IIC T4 Gb
Ex II 2D Ex tb IIIC T70°C Db IECEx designation:
Material of Enclosure: GRP
Material of Diffuser: UV stabilized PC (Polycarbonate)
Diffuser in three versions: clear/ opal / frosted
Impact resistance: HIGH (acc. to EN IEC 60079-0)
IP rating: IP66/ IP67
Color Temperature: 4000 K (optionally: 4500K, 5700K or 6500 K)
CRI: >80 (optionally: >70 or >90)
Ambient temperature: 0°C up to +45°C (ATEX)
Optional from -20°C up to +40°C
Price:
PrimeLine’s Ex ATEX luminaires provide very good value for money and, thanks to the solutions used, can also significantly reduce the final costs of a lighting installation. Send a no-obligation enquiry to convince yourself of the cost-effectiveness of our luminaires.
High performance
Rapid opening
No loose parts
Two lengths
Explosion-proof emergency luminaires with battery for sub-zero temperatures
PrimeLine is one of the first emergency luminaires in the world that, in a battery-powered version, can operate reliably in ambient temperatures down to -20°C. With this innovation, PrimeLine significantly expands the range of locations where emergency lighting can be used safely and effectively, setting a new standard for performance in demanding conditions.
- For unheated warehouses
- For cold stores
- For industrial freezers
- For loading docks
- For outdoor installations
- Anywhere there may be minus temperatures
Up to 4 cable glands + through-wiring
We used the tried and tested and reliable solutions used in the OptiLine luminaires for the construction of the new Ex ATEX explosion-proof emergency luminaire PrimeLine series. This has allowed us to significantly reduce production costs, which directly translates into an extremely competitive price – up to 30% lower than alternative products. One of the key improvements, taken from the highly-regarded OptiLine luminaire, is the modern through-wiring, which further enhances functionality and installation convenience.
- Allows easy combination of luminaires
- Eliminates expensive junction boxes
- Reduces cable wear
- Reduces assembly time
- Provides flexibility in electrical connection
- Reduces installation costs
Voltage disconnection when the diffuser is removed
PrimeLine luminaires in the explosion-proof version can be equipped with an integrated isolating switch that automatically disconnects the power supply when the cover is opened. This solution enhances user safety and simplifies maintenance and testing procedures.
Enhanced user safety
Protection of internal components
Facilitated functional tests
High mechanical durability of the switch (up to 300,000 operations)
Wide operating temperature range of the switch (from -40°C to +100°C)
ATEX and IECEx compliance
Hinged diffuser and gear tray:
Great convenience when installing luminaires
Easy access to gable glands (from 1 to 4 M20 or M25 glands)
Quick opening
Easy access to precisely fitted components
All luminaire components are protected against falling out
PrimeLine – explosion-proof emergency luminaire for zone 1
Three lighting variants – one explosion-proof luminaire, many possibilities
With a view to flexible adaptation to diverse needs, PrimeLine explosion-proof luminaires are offered in three functional versions:
✔ Basic lighting – safe lighting for industry every day,
✔ Emergency lighting with built-in battery – full emergency preparedness, even in minus temperatures,
✔ Emergency lighting under central addressable battery – built-in CBX module (optional CBY) guarantees full compatibility with Eaton systems and maximum control.
Maximum performance, minimum losses – Power Factor up to 0.99
PrimeLine explosion-proof zone 1 Ex emergency luminaires achieve an impressive PF ≥ 0.98, which translates into:
✔ Low energy losses,
✔ Stability of the entire electrical installation,
✔ Lower operating costs.
Variants powered at 230-250 VAC achieve PF = 0.98-0.99, confirming the highest quality and reliability in the most demanding industrial environments. Such a high Power Factor reduces the load on the network and promotes the energy efficiency of the installation – which translates directly into savings.
State-of-the-art LED power supplies for zone 1 Ex ATEX emergency luminaires
We have used advanced LED power supplies in explosion-proof emergency luminaires for zone 1, which provide:
✔ Maximum energy savings,
✔ Stable supply voltage for the LED modules,
✔ Long service life and high reliability.
Thanks to precise voltage stabilisation, the risk of flickering and brightness dips is eliminated, resulting in a constant and uniform light intensity – crucial in technological processes that require precision, especially when the luminaire is operating in emergency mode.
Wide range of voltage compatibility – one luminaire, many standards
PrimeLine luminaires (explosion-proof emergency luminaires for zone 1 Ex) work without any problems in installations supplied with voltage:
✔ 110 VAC, 50 Hz
✔ 220 VAC, 50 Hz
✔ 230 VAC, 50 Hz
✔ 240 VAC, 50 Hz
✔ 250 VAC, 50 Hz
Two lengths of explosion-proof emergency luminaire for zone 1, multiple applications
The ATEX PrimeLine explosion-proof luminaires for Zone 1 explosive atmospheres are available in two length variants – 670 mm and 1270 mm – to perfectly match spatial and installation-specific conditions.
Electrical and photometric data
PrimeLine length 670 mm, power 27.2 W and 1,5 hours emergency back-up
PrimeLine with 670 mm length, 31.6 watts and 1,5 or 3 hours emergency back-up
PrimeLine with a length of 1276 mm, power of 47.7 W and 1,5 hours of emergency back-up
PrimeLine with a length of 1276 mm, power of 56.5 W and 1,5 or 3 hours of emergency back-up
PrimeLine with a length of 1276 mm, power of 64.7 W and 1,5 or 3 hours of emergency back-up
Parameters calculated for a temperature of 25oC, colour temperature 4000K, CRI > 80. Tolerance +/- 5%.
Klosz MROŻONY
Mocne, delikatnie rozproszone światło, bez efektu olśnienia
9 981 lm bez olśnienia
Inteligentny klosz minimalizuje ryzyko olśnienia i zmęczenia oczu.
Optymalny do użytku wewnątrz i na zewnątrz
Najlepsza równowaga pomiędzy intensywnością światła, a brakiem olśnienia.
Klosz MLECZNY
Rozwiązanie dedykowane do dużych pomieszczeń, w których często obecni są ludzie.
Najlepszy do użytku w pomieszczeniach
Brak olśnienia, brak zmęczenia oczu, bardzo dobre oddawanie barw
Idealny dla większych powierzchni
Specjalny klosz mocno rozprasza światło, nadając mu miękkość
Klosz TRANSPARENTNY
Mocne oświetlenie. Najlepsza wydajność. Najwyższa elastyczność.
Wysoka moc
Aż 10342 lm doskonale sprawdza się na zewnątrz oraz w wysokich pomieszczeniach.
Skieruj światło za pomocą 22 soczewek
Wyjątkowa możliwość swobodnej zmiany kierunku świecenia.
Dimensions and installation of Ex PrimeLine luminaire
| Fixture type. | L | L1 | B |
|---|---|---|---|
| PrimeLine 60-********** | 670 | 400 | 173 |
| PrimeLine 12-********** | 1276 | 800 | 173 |
| Dimensions depend on mounting type. | H | B1 |
|---|---|---|
| Ceiling bracket D18. | 119 | 157 |
| Ceiling bracket D40. | 143,7 | 200 |
| M8 eye bolt for suspended mounting. | 154,2 | — |
| Pole mount bracket R50. | 156,2 | — |
| Wall bracket K45 | 184,7 | — |
| Ceiling bracket C | 153,4 | — |
Dimensions in mm
Handle D18
D40 handle
R20 handle
R50 handle
Handle K45
Handle C
Photometry.
Download.
Operating instructions
Download
PDF: Operating and Operating Instructions
Modern explosion-proof emergency luminaire for zone 1 – flexible, durable, competitive
With its robust design, extensive configuration and value for money, the new PrimeLine zone 1 Ex explosion-proof emergency luminaire is a viable alternative to many current solutions on the market. Its high mechanical resistance, ease of installation and full compatibility with Eaton central power systems make it an excellent choice for the most demanding industrial environments.
Safety certificates – ATEX, IECEx, CNBOP
PrimeLine meets all the necessary standards – from ATEX and IECEx to Polish CNBOP approval, which guarantees full compliance with the safety regulations applicable to the EU market and Poland.
Long emergency back-up time – up to 3 hours
Emergency variants of the PrimeLine explosion-proof luminaire for zone 1 Ex are available with a battery providing 1.5 hours or 3 hours of operation. For low-temperature applications, an option with a heater can be selected, which maintains optimal battery operating conditions even in harsh weather conditions.
Impressive light performance
The explosion-proof emergency luminaire can also function as primary lighting in zone 1 hazardous areas. PrimeLine provides extremely high luminous efficiency, setting itself apart from the competition in the category of Ex luminaires for zone 1.
For example:
- Shorter variant: 4400 lm, efficiency 125 lm/W
- Longer version: more than 8500 lm, efficiency as high as 145 lm/W
- Centrally powered emergency versions: 50% of the power of the basic light
Working in extreme temperatures – even outdoors
We have developed explosion-proof emergency luminaires for zone 1 for use in harsh environments. In particular, the emergency version with battery can operate in temperatures down to -20°C, allowing safe use in cold stores, production halls and outdoors.
Temperature operating ranges:
- Standard versions: -40°C to +50°C (optional +55°C)
- Emergency with battery: 0°C to +45°C (optional -20°C to +40°C)
- Emergency with central power supply: -30°C to +50°C